Radio’s working vocabulary helps people coordinate what listeners hear, from a presenter’s introduction to the next recorded clip. A single word can describe a sound, an instruction, or a moment in the schedule, depending on who uses it.
Informal expressions heard on air sit alongside production and engineering terms. Knowing the difference makes a broadcast easier to follow and gives a new newsroom member a useful starting point without requiring familiarity with every station’s habits.
Production terms behind a broadcast
A cue is a signal to start an action, such as playing a recording or bringing in a presenter. A producer might say, “Your cue is the end of the music.” The word can also refer to locating the point where a recording should begin; context reveals whether someone means the signal or the preparation.
A bed is audio, often music, played underneath speech. For example, a presenter may read an introduction over a quiet music bed. The level matters: the words should remain clear while the background supports the mood.
A sound bite is a short piece of recorded speech chosen for use in a story. A reporter covering a school meeting might include a parent’s comment as a sound bite, then explain the decision around it. The excerpt should retain enough context to represent the speaker fairly.
A wrap is a short, assembled report that generally combines a reporter’s narration with recorded material, such as an interview excerpt. A host can introduce the report before it plays. Stations may use different names and formats, so a local producer’s instructions determine what a particular wrap needs.
A rundown is the ordered plan for a program: stories, interviews, breaks, and other elements appear in sequence, often with estimated times. It helps a team see what comes next, though a breaking story or a long interview can require changes during the show.
Radio slang: expressions heard on air
Some radio slang describes the rhythm of a show rather than a piece of equipment. To hit the post is to finish speaking just as the vocals begin in a song’s introduction. A host might talk over the instrumental opening, then stop as the singer starts. It is a timing skill, not a reference to a social media post.
To back announce is to identify a song or artist after the track has played. A presenter might say, “That was Nina Simone,” before introducing the next selection. A front announcement, by contrast, comes before the item.
A break can mean a short interruption in the program for advertisements, a station identification, or other material. It can also refer to a presenter’s spoken segment between songs. In broadcast slang, a request to “make the break short” therefore makes sense only when the team knows which segment is meant.
An outro is material that closes a segment or program. A host’s final sentence, a piece of closing music, or both may form an outro. The term also appears in music, where it can mean the ending of a track rather than the end of an entire show.
Technical language and what listeners notice
A fader is a control used to adjust an audio channel’s level. Raising the microphone fader brings that source up in the mix; lowering it makes the source quieter. A mix is the combination of sources heard together, such as a voice and a music bed.
Clipping occurs when an audio signal exceeds the available range of a system and its peaks are cut off, creating distortion. It may sound harsh or crackly. Checking levels before recording and monitoring the signal help a team catch the problem.
Dead air is an unintended period of silence in a broadcast. It can happen when a recording fails to start or a presenter misses a cue. A deliberate pause is different: silence can also be an intentional part of an interview or a story.
AM and FM identify different ways a radio signal carries information. AM varies the signal’s amplitude, while FM varies its frequency. In everyday conversation, the abbreviations can also identify the broadcast bands or stations a listener selects; the surrounding discussion shows which meaning applies.
Making sense of a term in context
Radio lingo changes with the job and the station. The language of radio production may use the same word differently from a music host, while on-air terminology can vary between a live show and a recorded segment. A station’s own broadcast vocabulary is often the quickest guide to its routines.
This radio jargon belongs to broadcasting, not to the separate code systems used by public safety agencies. When an unfamiliar word appears, listen for the action around it: a cue before a clip, a fader moved during a mix, or a break between songs. The role of the speaker and the timing usually reveal the intended meaning.





